PMDC MOTOR, Industrial PMDC Motor, Megneto Electrical Motor, PMDC Geared Motors, Battery Operated Motors
Product Category
Industrial PMDC Motor
Battery Operated PMDC Motor
Small PMDC Motor
Magneto Electric Motor
Linear Actuator
DC Motor
PMDC Gear Motor
AC Motor
BLDC Motor
DC Drive
Contact Us
Telephone :
+91 - 79 - 26574493/ 40099535
Fax :
+91 - 79 - 26405193
Mobile :
+91 - 94266 93000
E-mail :
Typical Application :
Cast Alnico magnet are made by pouring melted alnico into a mold. The solidified material is rough ground and then hear treated and cooled.
Cast Alnico magnet represent the most versatile magnet material available. The range of properties can be accurately designed for specific applications by changes to element analysis and heat treatment.
Cast alnico magnet have the vast range of complex shapes and sizes at an economical cost, it’s ideal for high temperature application up to 550 °C, the hardness of 50 Rockwell C which is suitable for grinding. 
Cast Alnico magnet are applied to automobile parts, instruments, audio apparatus, electronic motors, educational equipment and aerospace equipment.
Typical Application :
Suitable for grinding and light cutting on surface grinder, EDM and drilling & milling machine.
Require no power source because of permanent powerful magnetic force. No electricity leakage trouble.
The face plate under soldering treatment prevents ensures no water or oil leakage.

Convenient adjustable spanner occupies few space only.

  Magnetic Force
13 to 108 (KN)
20 to 128
Typical Application :

Ferrite (Ceramic) Magnets are essentially composed of oxide materials with Barium Carbonate or Strontium Carbonate, manufactured under a powder metallurgical process. The feature of low recoil permeability, along with the high coercive force, makes them highly resistant to demagnetizing fields. In addition, their relatively low specific density and economical cost are also very attractive to the magnet 

  Curie Temperature
450 °C
  Maximum Operating Temperature
250 °C
Typical Application :
Flexible Magnetic Strips and Custom Profile are thermoplastic permanent magnetic Extrusions.
  Tensile Strength
5 to 10
  Elongation Rate
30 to 100
85 to 98
-10 to 80
Typical Application :
permanent lifting magnet has strong magnetic path produced by NdFeB magnet.They are been used to lift and transport the steel and iron for factories,docks, ware houses ,transportation
  Breaking Force
350 to 19200
  Rated Lifting Capicity
100 to 6000

Sintered NdFeB Magnets

Typical Application :
Sintered Neodymium Iron Boron magnets are particularly suitable for high volume production of a wide variety of shape and size ranges Precise dimensional control is achieved in both processed and usually the component does not require further machining High remanence, high coercive force, high maximum energy and are easily formed into various of sizes and shapes So they have been widely used in commercially available fields The majority of NdFeB magnets are anisotropic and can only be magnetized in the orientation direction Surface treatments are needed and can be done according to 
  Operating Temperature
80 to 200
  Intrinsic Coercive (Koe)
12 to 27
  Intrinsic Coercive (kA/m)
955 to 2130